Hartge has released their tuning program for BMW M5 F10.
The exterior gets a new front lip spoiler, carbon fiber mirror housings and different sets of 21� HARTGE wheels. There is also a set of lowering springs reducing the ride height by 25mm at the front and 20mm at the rear. HARTGE also offers a complete stainless steel sports exhaust system.
The Hartge M5 uses a set of lowering springs that bring the car closer to the road by 25 mm up front and 20 mm at the back.
Interior changes are limited, but customers can order aluminum pedals, velour floor mats and Hartge badging.
The most important upgrade is definitely under the hood where the 4.4 liter twin turbo V8 engine can now produce a total output of 642 HP (472 kW) and 810 Nm of torque (597 lb-ft), 80 HP (60 kW) and 130 Nm (96 lb-ft) more than the standard version. This is translated into a 0 to 100 km/h acceleration of 4.2 seconds and a top speed of 305 km/h (190 mph).
Press Release
The HARTGE program for the M5 and M6
11 50 0560 M
Engine conversion
for M5 F10 and M6 F12 / F13 (based on 412 kW / 560 hp)
472 kW (642 hp) / 6000 rpm 810 Nm (lb-ft 597) / 2950 rpm
51 10 0410 J
HARTGE front spoiler lip
in GFK, with ABE homologation
for M5 F10
37 21 1000 J
HARTGE CLASSIC 2 wheel set
9.5 x 21" offset 37 with 265 / 30 ZR 21 front
10.5 x 21" offset 40 with 295 / 25 ZR 21 rear
for M5 F10
37 21 1010 J
HARTGE CLASSIC 2 wheel set
9.5 x 21" offset 37 with 265 / 30 ZR 21 front
10.5 x 21" offset 30 with 295 / 25 ZR 21 rear
for M6 F12 / F13
Tidak ada komentar:
Posting Komentar